This is my newest creation using the fabulous colab kit and tube from Zindy and Jo from CBJ

You can purchase the tube & kit from HERE.

******

****

Paint Shop Pro. I used PSPXI but any version will work just as well.

Tube of choice. I am using the fabulous artwork of Ismael Rac, you will need a license to use his artwork. Please do not use his artwork without one. You can purchase his tubes from HERE.

You can use a scrap kit if you like, but you dont need to.  I used a kit from Foxys Designz called Whisper of Passion. Thank you Foxy for allowing me to use your gorgeous kit.  You can purchase the kit from HERE.

Filters Used: Filters Unlimited 2.0 - Distortion filters - Twister, Gaussian Blur, Andrew's Filters1 - Circular Noise, MuRa's Meister - Copies.

Font of choice.  I used Caesar Open.  You can get it HERE.

First off open a blank canvas 550 x 200 you can either make it transparent or any colour you like.

Open your tube and copy and paste to your canvas. Edit - Copy.

Open your new tag background and Edit - Paste as a New Layer.

Copy this layer.  Layers - Duplicate. Move one of then tube layers to the right of your tag.  Hide this layer.

Select your other copy of the tube and go to your filters and apply MuRa's Meister Copies with the following settings.

Now we need to blur the copies image. Go to Adjust - Blur - Gaussian Blur with the following settings.  Unhide your tube layer and position where you think it looks best.  I left mine to the right of the tag.

Once you have your image blured, go to Edit - Plugins - in your list of filters select Filters Unlimited 2.0 - Select Distortion Filters - Twister, with the default settings as seen below.

Select your move tool and move the image around till you have the desired image in the centre of your tag. Once you have it as you desire. Go to Effects - Plugins - Andrew's Filters1 - Circular Noise.  This is what you should now see.

Now add your elements if you desire.  I used a flower and some rose petals for effect.  I changed the colour of the flower petals to a colour that was complimentary to the tube. Adjust - Hue & Saturation - Colourise with the following settings. This will vary with the different coloured tube or background you have of course.

Apply a drop shadow to the tube with the settings as below.

You can copy your tube or use another one and paste to your tag.  Mirror the image if you are using the same tube. Image - Mirror.  With this image selected, reduce the Opacity to 50% and change the Blend Mode to Luminance (Legacy).

Add the copyright © information so that it is clear and easy to read.

Now add your name to your tag and save as a JPG or PNG.  Apply a filter effect if you desire or just a drop shadow to the name.

Once your name is on your tag, add a small border to it.  Image - Add Borders. With the following settings.

You are now finished making your tag.

I hope you enjoyed my tutorial. I would love to see your results.  

You can email me HERE with your results.

Thank you for trying my tutorial.

This tutorial was written by me on 22nd January 2012.

Any resemblance to other tutorials is purely coincidental.

Do not claim this tutorial as yours and do not post anywhere else. Please direct others to my blog.

©Fi_Devil Tutorials

****

Tag was made using a cluster frame made by Lisa Auty. 

This frame was made using the scrap kit from Hungry Hill Scraps

I used the fabulous artwork of Zindy. You can find her artwork here.

****

 ****




You will need:

Tube of Choice. I am using the gorgeous artwork of Mitzi Saco-Wiuff which can be purchased from PSP Tube Stop. Please do not use this artwork unless you have purchased it. You can buy it Here.

Scrap kit of Choice. Im using Lisa Cree's fabulous New Years kit from PSP Tube Stop. You can purchase it from her store which can be found Here.

Filters Used – Xenofex – Constellation,  Lucas software - 3D Shadow


Font of choice. I used Amazone BT

Supplies Here

Open a 500 x 500 canvas

Open your elements up and use one of the Textures for your background colour. I used IceAndGlitterBlue copy your texture and paste to your canvas, reduce by 85% and then apply your mask. Go to Layers – Load/Save Mask – Load Mask from Disk – Open your drop down options and choose the mask you would like to use.

Open your Star1Blue and copy and paste to your tag. Reduce by 65% and place under the top mask circle. Duplicate (Layers - Duplicate) the star and then flip (Image - Flip) so that it appears under the second circle on the mask.

Select your clock element and reduce by 45% and copy and paste to your tag. Where you position it is up to you. I placed mine in the top circle.

Copy and paste a champagne flute to your canvas and duplicate. On the second flute rotate your flute so that it has a slight angle to it. See settings below

Copy and paste your appropriate elements to your tag.

I recoloured the frame confetti to purple to match my tube with the above settings. Apply a drop shadow to your frame.


 Copy and paste your tube and place behind the frame, with this layer selected.  Highlight the sides of the frame using your Selection Tool.


Selections - Invert - Delete. This removes any unwanted tube from the outside of the frame you dont like.  Add another layer while the frame is still selected and flood fill with a colour of choice.  I used one to match my tube.

Paste your tube layer to your tag and add your copyright information to your tag. Make sure this is clear and easily read. I used a Pixelette font for this.

Add your wordart. I have supplied mine if you want to use it.

Add your name to your tag. Finish it off with either a drop shadow or a Gradient Glow.

You are now finished making your tag.

I hope you enjoyed my tutorial. I would love to see your results.

Thank you for trying my tutorial.

This tutorial was written by me on 1st January 2012.

Any resemblance to other tutorials is purely coincidental.

Do not claim this tutorial as yours and do not post anywhere else. Please direct others to my blog.

©Fi_Devil Tutorials

****

*****