Tag was made using a cluster frame made by Lisa Auty. 

This frame was made using the scrap kit from Hungry Hill Scraps

I used the fabulous artwork of Zindy. You can find her artwork here.

****

 ****




You will need:

Tube of Choice. I am using the gorgeous artwork of Mitzi Saco-Wiuff which can be purchased from PSP Tube Stop. Please do not use this artwork unless you have purchased it. You can buy it Here.

Scrap kit of Choice. Im using Lisa Cree's fabulous New Years kit from PSP Tube Stop. You can purchase it from her store which can be found Here.

Filters Used – Xenofex – Constellation,  Lucas software - 3D Shadow


Font of choice. I used Amazone BT

Supplies Here

Open a 500 x 500 canvas

Open your elements up and use one of the Textures for your background colour. I used IceAndGlitterBlue copy your texture and paste to your canvas, reduce by 85% and then apply your mask. Go to Layers – Load/Save Mask – Load Mask from Disk – Open your drop down options and choose the mask you would like to use.

Open your Star1Blue and copy and paste to your tag. Reduce by 65% and place under the top mask circle. Duplicate (Layers - Duplicate) the star and then flip (Image - Flip) so that it appears under the second circle on the mask.

Select your clock element and reduce by 45% and copy and paste to your tag. Where you position it is up to you. I placed mine in the top circle.

Copy and paste a champagne flute to your canvas and duplicate. On the second flute rotate your flute so that it has a slight angle to it. See settings below

Copy and paste your appropriate elements to your tag.

I recoloured the frame confetti to purple to match my tube with the above settings. Apply a drop shadow to your frame.


 Copy and paste your tube and place behind the frame, with this layer selected.  Highlight the sides of the frame using your Selection Tool.


Selections - Invert - Delete. This removes any unwanted tube from the outside of the frame you dont like.  Add another layer while the frame is still selected and flood fill with a colour of choice.  I used one to match my tube.

Paste your tube layer to your tag and add your copyright information to your tag. Make sure this is clear and easily read. I used a Pixelette font for this.

Add your wordart. I have supplied mine if you want to use it.

Add your name to your tag. Finish it off with either a drop shadow or a Gradient Glow.

You are now finished making your tag.

I hope you enjoyed my tutorial. I would love to see your results.

Thank you for trying my tutorial.

This tutorial was written by me on 1st January 2012.

Any resemblance to other tutorials is purely coincidental.

Do not claim this tutorial as yours and do not post anywhere else. Please direct others to my blog.

©Fi_Devil Tutorials

****

*****

******

Paint Shop Pro or Photoshop.  I used PSP XI but earlier or later versions will work as well.

I used the gorgeous artwork of Ismael Rac. You need to purchase the artwork from Ismael and have a license to use his artwork. You can purchase the tubes from here.

Scrap Kit of choice. I used the gorgeous creations by René Kunert. I didnt just use one in particular, I chose elements from three of her kits. You can purchase her kits from Rebel Dezigns here.

Font of choice. I used Beyond Wonderland. You can get it here.

Filters used. Alien Skin - Eye Candy 5 - Impact - Gradient Glow

Open a 600 x 400 blank canvas.

Select a paper from your kit.  I chose RD-WeddingBells_paper2.  Select the paper to show up in your foreground colour palette.

Select your Ellipse tool and hide the background colour in your materials palette. Using the following settings.

Do this twice and place them close together. Now select your rings and apply an inner bevel with the following settings.

Use one of the elements to join the circles together or create some staples to join them up.  I used the laces (RD-WeddingBells_element1) I erased the parts that didnt fit on the frames and moved them about so that they fitted just right.  I reduced mine by 60%.

Once you have your frame as you like it, apply a drop shadow to your frame and laces and then merge visible. Layers - Merge - Merge Visible. Position where you like the frame.

Open your tube or tubes that you want to use in your frame and copy to your canvas. Reduce to the size you are happy with.  Apply a drop shadow to the tubes. Using the settings below.

Select your magic wand and click in the inside of the frame. This will give you the dancing ants on the inside of the frame but it wont be fully on the side of your frame.  Go to Selections - Modify - Expand and expand by 15.  If the inside of the ribbon string is still empty, hold your shift key down and click your magic wand inside till the centre is empty.

Position your tube to be inside the frame and make sure that the tube layer is still selected, go to Selections - Invert and hit your delete key.  This should have removed the tube that was on the outside of the frame. Go to Selections and Select None.  Do the same for the other frame.

Once you have the tubes in the frame. You can either add a paper or plain coloured background on the inside of the circle.  Either use your ellipse tool and select the colour or paper you prefer making the background of the circle a colour that is complimentary to your tube.

Add your copyright information to your tag and position where you can see it clearly.

Use other elements from the kit or ones you have made and position on the tag where you desire. Add a drop shadow to them using the same settings above.

Add your name to your tag and for effect, use the Gradient glow to bring it out and apply the same drop shadow to your name.

Save your tag as a PNG or JPG.

You are now finished. 

Here is another version using my exclusive tube from Tony Tzanoukakis.

Thank you for trying my tutorial.

This tutorial was written by me on 27th December 2011. 

Any resemblance to other tutorials is purely coincidental.  Do not claim this tutorial as yours and do not post anywhere else. Please direct others to my blog.

©Fi_Devil Tutorials

***